#Video: contrast LCD-copies of the iPhone display X from the original

We are not the first time to answer the questions of readers and showing the work of dismantling and reconstruction of various Apple devices together with the specialists of the service center ModMac. This time, in addition to answering questions, we show how different LCD-a copy from the OLED display of the original iPhone, and even find the differences in the two original modules.

Questions to experts ModMac

Hello! Please tell me, is it possible to replace batteries in the headphones AirPods and the charging case? If Yes, what is the cost?

Meet the experts of the service center ModMac:
Unfortunately, high quality to replace the battery in the charging case from the Airpods impossible, since the apparatus is disposable, but we in turn can offer you to exchange your case for a new one. The cost of this procedure 3000 rubles.

I have the desktop screen iPad Pro after a year of use began to appear luminous in the head lamps, first one, and now 5-6. This was on iPad Air 2. What is it and what do I do? Thank you!

Meet the experts of the service center ModMac:
The problem may be the backlight of the display. Can also be a fault in the motherboard, for example, in capacitors. If you have not violated the rules of operation and your tablet is in warranty, you can try to contact authorized service center. ASC if for any reason you fail, then bring the machine to us for inspection. We will find out what is the problem and fix it as soon as possible.

IPad Pro 10.5 noticed a white glare on the screen. This is a warranty case (drops and bumps was not)? If not, how much is the repair screen?

Meet the experts of the service center ModMac:
If you are sure that there was water ingress, then you can contact an authorized service center for warranty. If they will deny warranty, you can contact us. We can replace your unit to the new 10000-14000 depending on the nature of the damage.

Interested in one question, even though it belongs to the category of theoretical. What happens if you put a plugged-in iPhone X on the pad for wireless charging. Is there a “foolproof” in such situations or it will lead to the scrapping of a smartphone?

Meet the experts of the service center ModMac:
We are not faced with this problem, but I do not advise you to experiment after some time may lead to failure of the circuit elements of conventional and wireless charging, especially if you use non-certified accessories.

If the glass on iPhone is scratched SE, then changing the glass or the whole module? Wouldn’t want to display instead of the original cheap Chinese fake.

Meet the experts of the service center ModMac:
On iPhone SE’s display represents one design with the glass and the matrix, thereby changing the display module Assembly. You will not be able to put the Chinese display on the iPhone SE it simply will not work. This machine can be put only the original module. Now in our service center, just the campaign. We can replace the display for 2490 rubles.

On iPhone 8 the sound was a bit quieter (especially from the top speaker, which is used in conversation). I go into the shower with him, but the water on him, of course, does not fall, although the couple gets a lot. Maybe it’s cause despite the existence of protection ip67? How can I solve this problem?

Meet the experts of the service center ModMac:
90% percent of cases the sound starts quiet work due to dirt in the upper dynamics. Therefore, most likely you will help regular cleaning. In all other cases, the need to replace the top speaker, but the problem with it is rarely.

Display replacement for iPhone X and compare the two originals with the copy

For comparison, two screens will need to remove the display. This is done as usual by loosening the screws at the bottom and poddawane display edges.

Next is to remove the shields with plumes in order to be able to disable.

After that, disconnect all cables and battery for a complete dismantling of the display module

Next, remove the display voice speaker Flex cable proximity sensor, illumination and facial recognition and a microphone.

Will try to install on iPhone non-original X display. He looks so-so. Poor build quality, poor soldering of the chip. And he is thicker, because it’s not even OLED and LCD.

To install the display in place, it is necessary to carry out the procedure in reverse order. Install back all components zanyatye with the original display.

The photo below shows the difference the difference in thickness of the smartphone, if you install a copy of the display instead of the original.

And in this photo you can see the difference in the picture. Automatic gain control and True Tone is disabled. Conclusions can do yourself.

To continue the experiment, we must again analyze all. Again, disconnect the display and disconnect from it all that you will have to move to another screen.

When all is removed, install it into original display and plug back all the cables and the battery. After like the first case, check the efficiency.

Now the thickness of the smartphones are identical, as both feature an original display, but if you compare them side by side, it is possible to detect a small difference. They give a picture with a slightly different temperature. Perhaps this is the case, when the supply of displays for the iPhone with different plants lead to small differences in them displayed image that are imperceptible without a direct comparison.

We show you how it looks unoriginal display X iPhone and how it differs from the original, while also revealed that the original displays can work in different ways. In the comments ask your questions for the next issue. The most interesting we will give the experts ModMac and they will answer them.

To discuss this article and other Apple news, you can in our Telegram chat.

We

Leave a Reply

Your email address will not be published. Required fields are marked *