The process of dismantling the phone Pixel 3 XL reveal screen made Samsung and adhesives

This theme is the process of dismantling the phone Pixel 3 XL reveal screen made Samsung and adhesives appeared on Engadget.

The company iFixit the process of dismantling the phone Pixel 3 XL from Google, where it is detected that the screen used on the phone making company Samsung, and that on the reverse phone Pixel 2 XL from last year where it was making its display by LG company.

As for the screen, it gave the company DisplayMate higher assessment on all screen phone Pixel 3 XL among four other devices namely Galaxy S9 Galaxy Note 9 and iPhone X and iPhone XS Max. It should be noted that all the screens of these devices are made by Samsung.

During the process of disassembly, I got phone Pixel 3 XL 4 points out of 10 points in the process of selecting the portability reform, which means the number 10 easily repaired. The good news is that the spikes only existing in the phone are Torx T3 standard, there is also the adhesive extends to secure the battery, the bad news is that the O-rings and adhesives used in the waterproofing makes the reform process complex (though they protect the device from water).

It is worth mentioning that the process of screen repair process requires dismantling the entire phone, while the glass used in each of the front and rear of the device can be broken easily. Put in mind that you’ll need to remove the adhesive if you want to do any internal reform of the phone, and then will re-paste color rear glass back, which is not easy at all since there are a lot of adhesives in this place.

Source

This theme is the process of dismantling the phone Pixel 3 XL reveal screen made Samsung and adhesives appeared on Engadget.

Leave a Reply

Your email address will not be published. Required fields are marked *